Chapter 32 show Commands
Management Switch Card User’s Guide
972
32.3.38 show sfp Command
Syntax:
show sfp <slot-port>
This command displays details about the transceiver installed in an SFP slot on an Ethernet line
card.
The following example displays about the SFP transceiver installed in slot 13 on an Ethernet line
card in slot 7.
32.3.39 show sys Command
Syntax:
show sys
This command displays the system CPU utilization for the last 60 seconds and memory usage
status. The following figure shows an example.
ras> show sfp 7-13
port = 13, sfp inventory
id = SFP transceiver
connector = LC
transceiver =
1000BASE-SX
intermediate distance
shortwave laser w/o OFC
multi-mode 62.5m
multi-mode 50 m
100 MB/sec
encoding = 8B10B
name = ZyXEL
partNumber = 64
revision = 14460636S061147503167
serialNumber = S061147503167
To Next Page
Loading...
