ZyXEL Communications MSC1000G - Voip Sip Dialplan Set Command

Chapter 36 voip Commands
Management Switch Card User’s Guide
1086
This command displays settings for all SIP profiles configured on this line card, or settings for the
SIP protocol profile(s) that refer to specified dial plan table. An example is shown next.
36.13.3 voip sip dialplan set Command
Syntax:
voip sip dialplan set <name> <pattern> <num-of-prefix-cut> <sip-server> [<prefix-
add-digits> <number-of-digits> <interdigit-timeout>]
where
ras> voip sip dialplan map dialplan1
Dial plan profile(s) list that refer to "dialplan1" dial plan table:
name
--------------------------------
dialplan_profile
name : dialplan1
slot port
---- -----------------------------------------------------------------------
-
1 2 3 4 5 6 7
123456789012345678901234567890123456789012345678901234567890123456789012
3 ------------------------------------------------
4 ------------------------------------------------
5 ------------------------------------------------
6 ------------------------
7 ------------------------------------------------
8
9 ------------------------------------------------
10 -----------------------------------------------------------------------
-
<name> =
The dial plan table name (up to 31 characters).