ZyXEL Communications MSC1000G - Port Show Command (G and GB Models)

Chapter 29 port Commands
Management Switch Card User’s Guide
821
29.31 port show Command (G and GB Models)
Syntax:
port show <slot>|<slot-port>[pvc|vlan]
where
This command displays the settings of the specified ports.
29.32 port show Command (MSC1024GC)
Syntax:
port show <slot>|<slot-port>[pvc|vlan|data|pots]
where
This command displays the settings of the specified ports.
29.33 port sip account Command
Syntax:
port sip account <slot-port> <account>
where
This command sets a port on the VoIP line card to use the specified SIP user name. If you do not
specify a SIP user name for a port, it uses the name of the call service profile the port uses.
<slot>
=
Specifies the slot of a line card (not MSC’s slot).
pvc
=
Displays a port’s PVC settings.
vlan
=
Displays a port’s VLAN settings.
<slot>
=
Specifies the slot of a line card (not MSC’s slot).
pvc
=
Displays a port’s PVC settings.
vlan
=
Displays a port’s VLAN settings.
data
=
Displays data service settings for the ALC1348G-51C.
pots
=
Displays POTS service settings for the ALC1348G-51C.
<account>
=
The user name for registering the SIP account this port uses.