Chapter 34 sys Commands
Management Switch Card User’s Guide
1046
The following example sets “OurSystem” as the system’s name.
34.3.20 sys info location Command
Syntax:
sys info location <location>
where
This command sets the geographic location of the system.
The following example sets Taiwan as the system’s geographic location.
34.3.21 sys info show Command
Syntax:
sys info show
This command shows general system information, such as the RAS code, firmware version, system
uptime and bootbase version. An example is shown next.
ras> sys info hostname OurSystem
<location>
=
The geographic location (up to 31 characters) of your device.
ras> sys info location Taiwan
ras> sys info show
[system info]
hostname :
location :
contact :
frame :
chassis :
[master card version info]
product model : MSC1000G
system up time : 01:28:29
f/w version : V3.70(AIN.0)b6 | 11/16/2006
bootbase version: VAIN(1.02) | 07/25/2006
database version : 18:28:38 2006/11/13ras>
To Next Page
Loading...
