ZyXEL Communications MSC1000G - Profile Ipqos Map Command

Chapter 30 profile Commands
Management Switch Card User’s Guide
882
This command configures the IPQoS profile’s queues.
The following example sets the EXAMPLE IPQoS profile’s queue 1 to use a PIR of 1088 kbps, CIR or
1024 kbps, PBS of 3072 bytes, and CBS or 3072 bytes; displays the profile’s settings; and sets the
VDSL port 1 in slot 6 to use the profile.
30.12.4 profile ipqos map Command
Syntax:
profile ipqos map <profile>
This command displays the associated ports using the specified IPQoS profile.
30.12.5 profile ipqos delete Command
Syntax:
profile ipqos delete <profile>
This
command removes the specified IPQoS profile. Here is how to delete the EXAMPLE IPQoS
profile.
30.13 profile ipqos2 Commands
Use these commands to configure the profile ipqos2 feature settings.
ras> profile ipqos queue EXAMPLE 1 1088 1024 3072 3072
ras> profile ipqos show EXAMPLE
ipqos profile : EXAMPLE
queue number : 8
idx pir cir pbs cbs level weight
--- ------ ------ ------ ------ ------ ------
0 131072 65536 65536 65536 0 50
1 1088 1024 3072 3072 1 50
2 131072 65536 65536 65536 2 50
3 131072 65536 65536 65536 3 50
4 131072 65536 65536 65536 4 50
5 131072 65536 65536 65536 5 50
6 131072 65536 65536 65536 6 50
7 131072 65536 65536 65536 7 50
ras> port vdsl ipqos 6-1 EXAMPLE
ras> profile ipqos map EXAMPLE
slot port/pvc
----- ----------------------------------------------------------------------
4 4-1 4-2
ras> profile ipqos delete EXAMPLE