ZyXEL Communications MSC1000G - Show Enet Command

Chapter 32 show Commands
Management Switch Card User’s Guide
942
This command displays the E1 port settings on port 2 of the IMA line card installed on slot 2.
Syntax:
show e1 performance <slot-port> [curr15|currday|last24hr|[96q <sq> <eq>]|[7day <sd>
<ed>]
This command displays the E1 packet statistics collected during the second to third days of the past
7 days with the counting starting from today.
32.3.9 show enet Command
Syntax:
show enet <enet1|enet2> [<vid>] |<slot>
This command displays Ethernet packet counters for the specified Ethernet interface or DSL line
card.
ras> show e1 status 2-2
admin : In of Service
frame : cascrc
impedance : 120ohm
alarm status:
LOS
LOF
Out of CRC MF
ras> show e1 performance 2-2 7day 2 3
Port 2 in 7 day history: start from 2 to 3
idx CV EB ES SES UAS
=============================================================
1 0 0 9 9 54384
2 0 0 0 0 0