Chapter 30 profile Commands
Management Switch Card User’s Guide
842
30.3 profile Commands Summary
The following table lists the profile commands. The P column on the right indicates the
administrator privilege level needed to use the command.
Table 366 profile Commands
COMMAND DESCRIPTION P
pro
fil
e
acl set <name> <rule> <action>
Adds or edits an ACL profile. See Section
30.4.3 on page 863 for more information.
8
delete <profile>
Deletes an ACL profile. 8
show [profile]
Displays ACL profile settings. 8
map <profile>
Displays which ports reference this ACL
profile.
1
adsl delete <profile>
Removes an unreferenced ADSL port
settings profile.
8
map <profile>
Displays which ADSL ports reference this
profile.
1
set <profile> <us-max-rate>
<ds-max-rate> [fast|delay
<us-delay> <ds-
delay>][minrate <us-min-
rate> <ds-min-rate>] [usmgn
<us-max-mgn> <us-min-mgn>
<us-tgt-mgn>][dsmgn <ds-
max-mgn> <ds-min-mgn> <ds-
tgt-mgn>] [usra
fixed|startup|runtime <us-
us-mgn> <us-ds-mgn>][dsra
fixed|startup|runtime <ds-
us-mgn> <ds-ds-mgn>]
Creates a profile of ADSL port settings.
us-max-rate: Upstream maximum rate
(64~4096 in Kbps).
ds-max-rate: Downstream maximum rate
(64~32000 in Kbps).
us-delay/ds-delay: Upstream/downstream
delay (1~255 in ms).
us-min-rate: Upstream minimum rate
(32~4096 in Kbps).
ds-min-rate: Downstream minimum rate
(32~32000 in Kbps).
us-max-mgn: Maximum noise margin
(0~310 in 0.1 dB).
ds-min-mgn: Minimum noise margin (0~310
in 0.1 dB).
ds-tgt-mgn: Target noise margin (0~310 in
0.1 dB).
fixed: no rate adaptation
startup: rate adaptation at initialization
runtime: rate adaptation any time
ds-us-mgn: up shift noise margin (0~310 in
0.1 dB).
ds-ds-mgn: us/ds down shift noise margin
(0~310 in 0.1 dB).
8
show [profile]
Lists the ADSL configuration profiles or a
specific profile’s detailed settings.
1
alarmadsl delete <profile>
Removes an unreferenced ADSL alarm
profile.
8
map <profile>
Displays which ADSL ports reference this
alarm profile.
1
To Next Page
Loading...
