Chapter 30 profile Commands
Management Switch Card User’s Guide
893
30.17.4 profile vdsl show Command
Syntax:
profile vdsl show [<profile>]
where
This command displays the VDSL profile list of the settings of a VDSL profile configured on the
system.
The following example displays the profile list and the settings of the
standard profile.
30.18 profile vdsl2 commands
Use the profile vdsl2 commands to configure VDSL2 profiles.
<profile> = The descriptive name for the profile.
ras> profile vdsl show
vdsl profile(s):
----------------------
1. DEFVAL
2. standard
3. standardB
ras> profile vdsl show standard
vdsl profile: standard
upstream downstream
-------- ----------
max rate (Kbps): 2048 16000
min rate (Kbps): 1024 3072
latency delay (ms): fast fast
max margin (dB): 1.2 1.2
min margin (dB): 0.0 0.0
target margin (dB): 0.6 0.6
ras>
To Next Page
Loading...
