ZyXEL Communications MSC1000G - Show Macff Arp Counter Port Command

Chapter 32 show Commands
Management Switch Card User’s Guide
960
This command displays the IEEE 802.1d MAC address forwarding table. The following example
displays the IEEE 802.1d MAC address forwarding table on Ethernet port 1.
32.3.27 show macff arp counter port Command
Syntax:
show macff counter port <slot-port>
This command displays the subscriber port’s MAC forced forwarding ARP request and ARP reply
packet statistics. Here is an example for port 1 on the line card in slot 12.
32.3.28 show macff arp counter uplink Command
Syntax:
show macff arp counter uplink <slot>
This command displays MAC forced forwarding ARP request and ARP reply packet statistics for the
line card’s uplink port that connects the line card to the MSC through the back panel of the chassis.
Here is an example for the line card in slot 12.
32.3.29 show macff status Command
Syntax:
show macff status <slot>
ras> show mac enet1
vid mac(total: 52) port
---- ----------------- -----
1 00:00:04:a0:00:31 enet1
1 00:00:1c:d4:1c:f6 enet1
1 00:00:e2:82:7d:90 enet1
1 00:02:3f:6c:6f:0a enet1
ras> show macff arp counter port 12-1
ARP Request ARP Reply
slot-port TX RX RX Drop TX RX RX Drop
---------- ---------- ---------- ---------- ---------- ---------- ----------
12-1 0 0 0 0 0 0
ras> show macff arp counter uplink 12
ARP Request ARP Reply
port TX RX RX Drop TX RX RX Drop
------ ---------- ---------- ---------- ---------- ---------- ----------
uplink 0 0 0 0 0 0