ZyXEL Communications MSC1000G - Loop Guard Statistics

Chapter 12 Statistics Screens
Management Switch Card User’s Guide
508
Figure 346 IMA Statistics: IMA Line Card: Pkt Counter
The following table describes the labels in this screen.
12.25 Loop Guard Statistics
Click Statistics > Loop Guard in the navigation panel to display the screen as shown.
Table 263 IMA Statistics: IMA Line Card: Pkt Counter
LABEL DESCRIPTION
vpi, vci Enter the VPI and VCI of a channel on the IMA group and then click Load to display the
packet counters.
Flush Click Flush to clear the counters.
Since pvc create This section displays statistics collected since the specified channel in this IMA group was
created.
Since last reset This section displays statistics collected since last counters were cleared.
IfPkts This field displays the number of octets received/transmitted on
this port.
IfUCastPkts This field displays the number of unicast packets received/transmitted on this port.
IfMCastPkts This field displays the number of multicast packets received/transmitted on this port.
IfBCastPkts This field displays the number of broadcast packets received/transmitted on this port.
IfDiscard This field displays the number of received/transmitted packets that were discarded on
this port.