ZyXEL Communications MSC1000G - Profile Voip Sip Callsvc Set Command (G and GB Models)

Chapter 30 profile Commands
Management Switch Card User’s Guide
912
This command displays which subscribers use the specified SIP call service profile. An example is
shown, displaying the ports that use a SIP call service profile named “sip-cs001” (ports 1 to 38 on
slot 4).
30.22.3 profile voip sip callsvc set Command (G and GB Models)
Syntax:
profile voip sip callsvc set <profile>
[keypattern <pattern-table>]
[nopassword | {password <password>}
[registration off|{on [<re>]}]
[numberplan off|on {<cc> <ndc> <numberplan-table>}]
[localhelp off|on {<tel-number> <localhelp-table>
[<tel-number> <localhelp-table>...]}]
[dnd on|off]
[dtmf bypass|rfc2833|sipinfo|rfc2833like|plaintext]
[callhold on|off]
[callwait on|off]
[callreturn on|off]
[cidcw on|off]
[clip on|off]
[clir on|off]
[calltransfer on|off]
[conference on|off]
[callsvcmode europe|usa]
[onhooktransfer on|off]
[conftransfer on|off]
[fax t38|g711]
[firstdigit <fdt>]
[interdigit <idt>]
[flash invite|rfc2833|rfc2833like|sipinfo1|sipinfo2|sipinfo3|sipinfo4|{sipinfo5
[<rc>]}|{sipinfo6 [<si>]}
[localcall on|off]
[mwi on|off]
[reanswer <ra>]
where
ras> profile voip sip callsvc map sip-cs001
slot port
---- ------------------------------------------------
1 2 3 4
123456789012345678901234567890123456789012345678
3
4 VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV----------
5
6
7
8 ------------------------
9
10
keypattern =
Has the call service profile use a VoIP key pattern.