ZyXEL Communications MSC1000G - Profile Voip Sip Callsvc Show Command (G and GB Models)

Chapter 30 profile Commands
Management Switch Card User’s Guide
915
•CLIR: on
• Call transferring: on
• Conference: on
• Call Service Mode: europe
• On hook transfer: off
• Conference transfer: off
•CIDCW: on
• fax: G.711
• Initial Digit Time: 8 seconds
• Inter Digit Time: 3 seconds
• DTMF: bypass
• Local call: off
• Flash: invite
•MWI: on
•Reanswer time: 0
• Numbering plan: off.
• Local help: off
The following example shows a command configuring a SIP call service profile named “csp1” with
the following settings:
• Password: “1959”
• Numbering plan: on
• Country code: 49
• National destination code: 40
• Numbering plan table: “plan9”
• Call holding: off
• Call waiting: off
• Call transferring: on
•CLIP: off
•CLIR: on
•DND: on
•DTMF: SIP INFO
•Fax: T-38
30.22.4 profile voip sip callsvc show Command (G and GB Models)
Syntax:
profile voip sip callsvc show [<name>]
ras> profile voip sip callsvc set csp1 password 1959 numberplan on 49 40
plan9 callhold off callwait off calltransfer on clip off clir on dnd on dtmf
sipinfo fax t38