Chapter 11 Profile Screens
Management Switch Card User’s Guide
408
11.28 VoIP Dial Plan Profile Screen
The system uses dial plans to identify specific types of phone numbers dialed by a user, and to
process the number before transmission by deleting or adding digits according to the relevant rule.
The dial plan can also forward the call to a specific SIP server. Use a dial plan profile to collect a
group of dial plans into a profile. Then assign the dial plan profile to a port to apply all of the dial
plans included in the profile.
Click Profile > Dialplan. The following screen displays. Use this screen to create and edit dial plan
profiles. The dial plans must already be configured before you can do this (see the VoIP >
Dialplan screen).
Figure 270 Profile > Dialplan
Name This is the name of the profile.
Select Select the profile you wish to load or delete.
Modify Select a profile and click this in order to edit its configuration.
Delete Select a profile and click this to delete the profile. Once deleted, information cannot be
retrieved.
Table 189 Profile > Queue Rate Limit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
