ZyXEL Communications MSC1000G - Port Vdsl Set Command

Chapter 29 port Commands
Management Switch Card User’s Guide
836
• Show the settings.
29.41.19 port vdsl set Command
Syntax:
port vdsl set <slot-port> <profile> <mode>|<pmask>
where
Use this command to set the VDSL line profile and VDSL mode or mask the port(s) use.
ras> port vdsl rficustom set 1 3500 3800
ras> port vdsl rficustom enable 1
ras> port vdsl rficustom show
index state start_freq stop_freq
------- ------- ------------ -----------
1 V 3500 3800
2 - 0 0
3 - 0 0
4 - 0 0
5 - 0 0
6 - 0 0
7 - 0 0
8 - 0 0
ras>
<profile> =
Sets the custom line profile.
<mode> =
Sets the VDSL standard band plan profile
(auto|8a|8b|8c|8d|12a|12b|17a|adsl2+| vdsl2).
<pmask> =
Specify the bit mask that represents features to disable for the
connection. This is for advanced troubleshooting.
option bits, 0x00000001~0xffffffff,
0x00000001 G.992.1
0x00000002 G.992.2
0x00000004 G.992.3
0x00000010 G.992.5
0x00000020 ANSI T1.413
0x00000040 ETSI TS 101 388
0x00000080 G.993.2 8a
0x00000100 G.993.2 8b
0x00000200 G.993.2 8c
0x00000400 G.993.2 8d
0x00000800 G.993.2 12a
0x00001000 G.993.2 12b
0x00002000 G.993.2 17a