ZyXEL Communications MSC1000G - Profile Voip Sip Dialplan Set Command

Chapter 30 profile Commands
Management Switch Card User’s Guide
923
This command displays subscribers referenced by the specified one. An example is shown to display
the call service profile named “dialplan_profile”.
30.24.3 profile voip sip dialplan set Command
Syntax:
profile voip sip dialplan set <profile> <index> [<dialplan-table>]
where
This command sets the specified SIP dial plan profile. An example is shown to set the dial plan
profile named “dialplan_profile”.
30.24.4 profile voip sip dialplan show Command
Syntax:
profile voip sip dialplan show <profile>
This command shows SIP dial plan profile or the specified SIP dial plan profile. An example is shown
to display all dial plan profiles.
ras> profile voip sip dialplan map dialplan_profile
slot port
---- ----------------------------------------------------------------------
--
1 2 3 4 5 6 7
123456789012345678901234567890123456789012345678901234567890123456789012
3 ------------------------------------------------
4 ------------------------------------------------
5 ------------------------------------------------
6 ------------------------
7 ------------------------------------------------
8
9 ------------------------------------------------
10 -----------------------------------------------------------------------
<index> =
The index number for an entry in the dial plan table (1~32).
<dialplan-table> =
The dialplan table name (<=31 characters).
ras> profile voip sip dialplan set dialplan_profile 1 dialplan1
ras> profile voip sip dialplan show
Dialplan Name(s):
----------------------
1. DEFVAL
2. dialplan_profile