Management Switch Card User’s Guide 147
CHAPTER 5
Alarm Screens
This chapter describes alarm management.
5.1 Current Alarm Screen
Click Alarm > Current Alarm to display the screen where you can view all current alarms. You can
also click a tab to view the alarms only specific to one severity level.
Figure 79 Current Alarm: All
The following table describes the labels in this screen.
Table 55 Current Alarm: All
LABEL DESCRIPTION
UP Click UP to go to the System Info screen.
Show All Select the radio button to display all alarms.
Show Alarm
From To (YYYY/
MM/DD)
Select the radio button and specify a range of time in the year/month/day format to display
the alarms occur during this period only.
Apply Click Apply to display the alarms (either all or from the time range you selected).
No This is the index number of the alarm.
Alarm This is the alarm category.
eqpt represents equipment alarms.
dsl represents Digital Subscriber Line (DSL) alarms.
enet represents Ethernet alarms.
sys represents system alarms.
all specifies every alarm category.
To Next Page
Loading...
