Chapter 14 Sys Screens
Management Switch Card User’s Guide
568
14.4 General Setup
Click Sys > General Setup from the navigation panel to open the following screen.
Figure 391 General Setup
Apply Click Apply to save the changes in this screen to the system’s volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save link
on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 303 Access Control: Secured Client6 (continued)
LABEL DESCRIPTION
To Next Page
Loading...
