ZyXEL Communications MSC1000G - MAC Forced Forwarding Examples

Chapter 4 Access Control List Screens
Management Switch Card User’s Guide
140
Figure 72 MAC Force Forwarding
4.28 MAC Forced Forwarding Examples
In your network, you have the following IP assignments.
Example 1: Source is a Single IP
To force all traffic sent between subscriber 1 and the server (S) through AR, use the following
settings in the ACL> MACFF > MACFF Entry screen. Note that 32 entered in the NetMask field
indicates a single subscriber device is included.
AB
C
AR
S
D
AB
C
AR
S
D
Without MAC Force Forwarding With MAC Force Forwarding
Table 49 MAC Forced Forwarding Example: IP Address Settings
HOSTS VLAN IP ADDRESS
subscribers 1~8 100 192.168.1.10~192.168.1.18
subscribers 9~24 200 192.168.1.200~192.168.1.216
server (S) 100, 150, 200 192.168.1.250
access router (AR) 1, 100 192.168.1.254
access router 2 (AR2) 1, 100, 150, 200 192.168.1.253