ZyXEL Communications MSC1000G - Voip Sip Ip Route Set Command (MSC10124 GC)

Chapter 36 voip Commands
Management Switch Card User’s Guide
1089
36.14.4 voip sip ip route set Command (MSC10124GC)
Syntax:
voip sip ip route set default|<ip> [/<netmask>] <gateway_ip> [<metric>]
where
This command configures a routing entry of specified slot. By default, no routing table entry is defined.
36.14.5 voip sip ip route show Command (MSC10124GC)
Syntax:
voip sip ip route show
This command displays the settings of a routing entry of specified slot.
36.14.6 voip sip ip set Command (MSC10124GC)
Syntax:
voip sip ip set sip <ip_s> [/<mask_s>] <vid_s> rtp <ip_m> [/<mask_m>] <vid_m>
where
Use this command to configures the IP address and VLAN ID of a specified slot.
36.14.7 voip sip ip show Command (MSC10124GC)
Syntax:
voip sip ip show
This command shows IP information of the specified VoIP SIP line card.
<ip> =
The IP address of the DNS server.
<netmask
>
=
This is the network mask: 0 ~ 32.
<gateway
_ip>
=
This is the gateway IP.
<metric> =
This is the metric number of the route 1 ~ 15.
<ip_s> =
The IP address of SIP signaling IP.
<mask_s> =
The network mask of SIP signaling IP (0 ~ 32).
<vid_s> =
The VLAN ID of SIP signaling IP (1 ~ 4094).
<ip_m> =
The IP address of rtp media IP.
<mask_m> =
The network mask of RTP media IP (0 ~ 32).
<vid_m> =
The VLAN ID of RTP media IP (1 ~ 4094).