Chapter 9 Subscriber Port Setup Screens
Management Switch Card User’s Guide
309
9.31 VDSL2 PVC
Click Port > VDSL2 PVC in the navigation panel to open the VDSL2 PVC Setup screen. Use this
screen to configure PVC settings for individual ports.
Figure 202 Port > VDSL2 PVC
The following table describes the fields in this screen.
Apply Click Apply to save the changes in this screen to the system’s volatile memory. The system
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel and then the Save button to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring the screen again.
Table 143 E1 Port Setup: Advanced (continued)
LABEL DESCRIPTION
Table 144 Port > VDSL2 PVC
LABEL DESCRIPTION
Slot Select the number of a line card’s slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Port Select the number of a DSL port on the line card.
To Next Page
Loading...
