ZyXEL Communications MSC1000G - Profile Voip Sip Set Command (MSC1024 GC)

Chapter 30 profile Commands
Management Switch Card User’s Guide
908
The following example shows a command configuring a SIP profile named “sip10” with the following
settings:
• SIP server domain name: host1.domain1
• SIP registrar server domain name: host2.domain2
• SIP proxy server domain name: host3.domain3
• SIP server port number: 5061
• SIP registrar server port number: 5062
• SIP proxy server port number: 5063
•URI type: SIP
• IEEE 802.1p tag: 5
• DSCP tag: 36
• Keep alive: on
• SE: 1000
•PRACK: on
• Resend percentage: 40
• Nonce count keep: on
• QoP quotes: off
• Refer-To Bracket: Off
• Refer-To Dot: Hexidecimal
• RTP Ports: 55000 to 60000
30.21.4 profile voip sip set Command (MSC1024GC)
Syntax:
profile voip sip set <sip-ip> | <sip-dn>
<regsvr-ip> | <regsvr-dn>
<proxysvr-ip> | <proxysvr-dn>
[sipport <sip-port>]
[regsvrport <regsvr-port>]
[proxysvrport <proxysvr-port>]
[pbit <pbit>]
[dscp <dscp>]
[keepalive off|on <se>]
[prack on|off]
[switchtype <switchtype>]
[registration off|{on [<regist-expire>]}]
[registrationretry [<regist-retry>]]
[prefix <prefix-add-digits>]
[rtpport <start-rtp-port> <end-rtp-port>]
ras> profile voip sip set sip10 host1.domain1 host2.domain2 host3.domain3
sipport 5061 regsvrport 5062 proxysvrport 5063 uritype sip pbit 5 dscp 36
keepalive on 1000 prack on resend 40 noncecountkeep on qopquote off
refertobracket off refertodot hex rtpport 55000 60000