Chapter 6 Diagnostic Screens
Management Switch Card User’s Guide
168
Figure 91 IP Ping
The following table describes the labels in this screen.
6.5 Trace Route Screen
Click Diagnostic > IP Trace Route in the navigation panel to display this screen. Use this screen
to show the path that packets take from the system to a specific IP address.
Figure 92 Trace Route
Table 66 IP Ping
LABEL DESCRIPTION
IP Ping Type the IP address of a device that you want to ping in order to test a connection.
In the field to the right specify the number of times that you want to ping the IP address.
Click Ping to ping the IP address that you specified.