ZyXEL Communications MSC1000G - Port Vdsl Optionmask Command

Chapter 29 port Commands
Management Switch Card User’s Guide
833
The following example shows the PSD mask for “VDSL2_A_NUS0”.
29.41.12 port vdsl optionmask Command
Syntax:
port vdsl optionmask <slot-port> <option-mask>
where
This command sets the PSD mask for the option bit on the specified port.
The following example enables Trellis coding on traffic on port 5 on the VDSL card in slot 4.
29.41.13 port vdsl power Command
Syntax:
port vdsl power <slot-port> fix|power|rate <max_us_txpwr> <max_ds_txpwr> <max_rxpwr>
ras> port vdsl limitmask show 1
1 (vdsl2_a_nus0)
Upstream Band Plan
Index 1 2 3 4
----------- -------- -------- -------- --------
Start tone 880 1981 5343
Stop tone 1196 2773 6947
Downstream Band Plan
Index 1 2 3 4
----------- -------- -------- -------- --------
Start tone 33 1216 2793
Stop tone 859 1961 5323
Downstream Breakpoints
Index 1 2 3 4 5 6 7 8
----------- ------- ------- ------- ------- ------- ------- ------- -------
Bp 33 65 256 376 512 819 859 1216
psd(dBm) -58.0 -40.0 -40.0 -50.0 -51.5 -53.2 -58.2 -57.2
Index 9 10 11 12
----------- ------- ------- ------- ------- ------- ------- ------- -------
Bp 1245 1961 2793 5323
psd(dBm) -55.0 -55.0 -60.0 -60.0
Upstream Breakpoints
Index 1 2 3 4 5 6
----------- ------- ------- ------- ------- ------- ------- ------- -------
Bp 880 1196 1981 2773 5343 6947
psd(dBm) -53.0 -53.0 -54.0 -54.0 -60.0 -60.0
<option-mask> =
The PSD mask value for the option bit.
ras> port vdsl optionmask 4-5 0x0001