Chapter 34 sys Commands
Management Switch Card User’s Guide
1058
34.6.4 sys user disable Command
Syntax:
sys user disable <name>
where
This command turns off an administrator account.
The following example turns off the “bob” administrator account.
34.6.5 sys user show Command
Syntax:
sys user show
This command displays authentication settings and user accounts. The following is an example.
34.6.6 sys user online Command
Syntax:
sys user online
This command displays information administrators that are logged into the switch.
The following is an example. * denotes your session.
<name>
=
The user name for the account
ras> sys user disable bob
ras> sys user show
auth mode: local then radius
radius server ip: 0.0.0.0 port: 1812 secret: 1234
index en name privilege
----- -- ---------------- ---------
1 V admin high
ras>
ras> sys user online
[session info ('*' denotes your session)]
session user remote ip login time
---------- ---------------- --------------- -------------------
*telnet admin 123.23.19.11 13:08:27 2005/06/09
ras>
To Next Page
Loading...
