ZyXEL Communications MSC1000G - Page 913

Chapter 30 profile Commands
Management Switch Card User’s Guide
913
<pattern-
table>
=
Specify the VoIP key pattern to use.
nopassword =
The call service profile does not require a password (default).
password =
The call service profile requires a password.
<password> =
The call service profile’s password.
registration =
When this is off. the call service profile does not use the registration
timeout feature.
Choose on and enter a time period (<re>) to have the system use the
registration timeout feature. If the system does not receive a registration
confirmation message from the SIP server in the time specified, it drops the
connection.
Select off to not use the registration timeout feature.
re =
This is the registration expiration time in seconds, 120~65535.
numberplan =
When this is off, the call service profile does not reference a configured
numbering plan. When this is on, the call service profile references the
specified numbering plan.
<cc> =
The country code. This defines the digits the numbering plan inserts when a
rule contains “\c”.
<ndc> =
The national destination code. This defines the digits the numbering plan
inserts when a rule contains “\d”.
<numberplan-
table>
=
The numbering plan this call service set is to use.
localhelp =
When this is off, the call service profile does not have users access a local
help table when they call a specific telephone number.
To have this call service profile use a local help table, choose on and specify
a telephone number (tel-number) and the name of the local help table
(localhelp-table) users are to access when they call the telephone
number.
<tel-number> =
The local help telephone number, up to 15 characters.
<localhelp-
table>
=
The name of the local help table name, up to 31 characters
dnd =
Do not Disturb allowed/prohibited.
dtmf bypass =
The system does not relay DTMF signals.
dtmf rfc2833 =
The system relays DTMF signals according to RFC 2833.
dtmf sipinfo =
The system relays DTMF signals as SIP INFO messages.
dtmf
rfc2833like
=
The system relays DTMF signals as SIP INFO messages, but carried as RFC
2833 payload.
callhold =
Call holding allowed/prohibited.
callwait =
Call waiting allowed/prohibited.
callreturn =
Call return allowed/prohibited.
cidcw =
Calling Identity Delivery on Call Waiting allowed/prohibited.
clip =
Caller Line Identification Presentation allowed/prohibited.
clir =
Caller Line Identification Restriction allowed/prohibited.
calltransfer =
Call transferring allowed/prohibited.
conference =
Turns support for conference calls on or off.