Chapter 24 ima Commands
Management Switch Card User’s Guide
720
This command sets a double-tagged PVC (DTPVC) on an IMA line card.
The following example shows how to set a DTPVC on IMA group 3 of slot 2 using the following
settings:
• S-VID/S-PRI: VLAN ID 300 and priority 2
• C-VID/C-PRI: VLAN ID 400 and priority 1
• The name of an ATM profile applied to this PVC: DEFVAL
• PVC: 0/35 and using the llc encapsulation method
Syntax:
ima dtpvc show <slot>|<gid>|<slot-group-vpi/vci>
This command shows IMA DTPVC settings for the specified IMA slot, IMA group, or IMA group with
a channel.
The following example shows how to display all DTPVC settings on the IMA line card installed on slot
2.
cvid =
The c-tag VLAN ID, 1~4094.
cpri =
The priority for the c-tag VLAN, 0~7.
ras> ima dtpvc set 2-3-0/35 DEFVAL llc 300 2 400 1
ras> ima dtpvc show 2
pvc svid s_pri cvid c_pri mux profile
--------------- ----- ----- ----- ----- ------ ------------
2-3-0/35 300 2 400 1 llc DEFVAL
To Next Page
Loading...
