Chapter 11 Profile Screens
Management Switch Card User’s Guide
395
8 Create PVC 0/35 and Apply the Data IPQoS Profile
8a In the navigation panel, click Port > PVC to open the PVC Setup screen.
8b Select the slot where the line card is installed and port 2. Click Load.
Figure 256 Data PVC Setup Screen PVC 0/35
8c In the VPI/VCI fields, enter “0” and “35”.
8d Enter 3 in the PVID field.
8e In the Profile field, select “Data”.
8f In the Priority field, select 0.
8g Click Apply.
9 Save the Settings
9a In the navigation panel, click Config Save > Config Save to open the VDSL Port Setup
screen.
Figure 257 Config Save Screen
To Next Page
Loading...
