ZyXEL Communications MSC1000G - Page 710

Chapter 23 diagnostic Commands
Management Switch Card User’s Guide
710
Syntax:
diagnostic loopback ima disable <slot-gid>
This command stops the previous IMA loopback test for the specified IMA group.
The following example performs an IMA loopback test using a testing pattern ff on IMA group 3
and link 1 of slot 2. Then it also displays the settings.
The following example stops the IMA loopback test on IMA group 1 on slot 2 and then displays the
setting.
ras> diagnostic loopback ima enable 2-1 3 ff
ras> dia loopback ima show 2-1
slot-group status test pattern
----------- ------- ------------
2 - 1 enable ff
received pattern
1 2 3 4 5 6 7 8
---- ---- ---- ---- ---- ---- ---- ----
0 -- -- 00 00 -- -- -- --
ras> diagnostic loopback ima disable 2-1
ras> diagnostic loopback ima show 2-1
slot-group status test pattern
----------- ------- ------------
2 - 1 disable ff
received pattern
1 2 3 4 5 6 7 8
---- ---- ---- ---- ---- ---- ---- ----
0 -- -- 00 00 -- -- -- --