ZyXEL Communications MSC1000G - Page 736

Chapter 28 multicast Commands
Management Switch Card User’s Guide
736
enable proxy|snooping
[igmpv2|igmpv3|mld
v1|mldv2]
Turns on IGMP proxy or snooping using the
specified version. IGMP v2 and v3 are for
IPv4 and Multicast Listener Discovery
(MLD)v1 and 2 are for IPv6.
8
fastleave enable
Enables IGMP fast leave to allow the
system to remove a port from a multicast
group once a leave message is received
and the fast leave timer expires. In IPTV
application, this feature allows users to
quickly switch between video channels.
8
disable
Disables IGMP fast leave. 8
timer <timer>
Specifies the time the device has to leave a
multicast group.
timer: The time duration (0~256 seconds)
8
history disable <slot>
[<slot> ...]
Disables IGMP historical data collection on
one or more slots.
slot: specify a slot or slots containing a
VLC13xx line card.
8
enable <slot>
[<slot> ...]
Enables IGMP historical data collection on
one or more slots.
slot: specify a slot or slots containing a
VLC13xx line card.
8
flush <slot>
[<slot> ...]
Clears all IGMP historical data collection for
one or more slots.
slot: specify a slot or slots containing a
VLC13xx line card.
8
ftpupload <ip>
<filename>
<useranme>
<password> slot
<slot> [<slot>
...]
Uploads the IGMP historical data to an FTP
server.
filename: the file name to store the
uploaded IGMP historical data on the FTP
server.
username:the user name to log into the
FTP server.
password:the password of the user
account.
slot: specify a slot or slots containing a
VLC13xx line card.
8
show
Displays all IGMP history status for each
slot.
8
Table 362 multicast Commands (continued)
COMMAND DESCRIPTION P