Chapter 4 Access Control List Screens
Management Switch Card User’s Guide
92
Figure 34 LAN 2 LAN Example
Click ACL > DHCP Snoop > Lan2Lan to display the screen shown next.
Note: LAN 2 LAN is disabled on all of the subscriber ports by default so line cards will not
forward DHCP Discover or Request packets to subscriber ports and will drop DHCP
Offer or Reply packets received from subscriber ports.
Figure 35 Lan2Lan
The following table describes the labels in this screen.
Table 19 LAN 2 LAN
LABEL DESCRIPTION
Slot
Port
Use the drop-down list boxes to select a DSL port or Gigabit Ethernet port on a line card
for which you want to configure DHCP snooping.
Load Click Load to display the port’s current settings.
DHCP Reply
DHCP Request
D
A
B
To Next Page
Loading...
