Chapter 32 show Commands
Management Switch Card User’s Guide
928
e1 status <slot-port>
Displays the status of an E1 port. 1
performance <slot-port>
curr15|curr
day|last24h
r|[96q <sq>
<eq>]|[7day
<sd> <ed>]
Displays an E1 port’s performance information
collected during the specified time period.
curr15: Statistics are collected in the current
quarter of an hour. For example, if you use this
command at 2:25, this section displays statistics
collected since 2:15.
currday: Statistics are collected today. For
example, if you use this command at 10:25, this
section displays statistics collected since mid-night
till 10:25.
last24hr: Statistics are collected in the past 24
hours. For example, if you use this command at
10:25, this section displays statistics collected since
10:25 yesterday till 10:25 today.
96q: Statistics are collected during the specified
starting and ending quarter hours of the past 96
quarter hours (=24 hours).
• sq: starting quarter hours, 1~96
• eq: ending quarter hours, 1~96, ending quarter
hours must be equal to or greater than starting
quarter hours
7day: Statistics are collected during the specified
starting and ending days of the past 7 days (=one
week).
• sd: the starting day, 1~7
• ed: the ending day, 1~7, ending day must be
equal to or greater than starting day
1
enable-
password
Displays the passwords for enabling specific
privilege levels.
1
4
enet <giga-port>
[<vid>]|<slot>
Displays Ethernet packet counters. 1
gbond <slot>
[bond_name]
Displays gbond settings on a line card.
bond_name: The name of a port bonding group.
1
https info
Displays HTTPS related statistics and details. 1
session
Displays the current HTTPS connections. 1
certificate
Displays the system’s certificate details including
the public key.
1
key
Displays the public and private key of the system’s
certificate.
1
igmp info
Displays IGMP related statistics. 1
group [<vid>
<group_ip>]
Displays the learned IGMP group settings and
status.
1
port info <slot-
port>
Displays IGMP related information on the port. 1
group
<slot-port>
Displays joint IGMP group information on the port. 1
Table 368 show Commands (continued)
COMMAND DESCRIPTION P
To Next Page
Loading...
