Chapter 32 show Commands
Management Switch Card User’s Guide
974
This command displays the VDSL port’s impulse noise monitoring statistics.
The following example shows the current impulse noise monitoring statisitcs on the VDSL line
connected to port 2 of the line card in slot 12
ras> show vdsl inm 12-2 curr
InmCurr:
vtuc vtur
----------- -----------
EQINP[ 1] : 0 0
EQINP[ 2] : 0 0
EQINP[ 3] : 0 0
EQINP[ 4] : 0 0
EQINP[ 5] : 0 0
EQINP[ 6] : 0 0
EQINP[ 7] : 0 0
EQINP[ 8] : 0 0
EQINP[ 9] : 0 0
EQINP[10] : 0 0
EQINP[11] : 0 0
EQINP[12] : 0 0
EQINP[13] : 0 0
EQINP[14] : 0 0
EQINP[15] : 0 0
EQINP[16] : 0 0
EQINP[17] : 0 0
IAT[ 0] : 0 0
Press any key to continue, 'n' to nopause,'e' to exit
IAT[ 1] : 0 0
IAT[ 2] : 0 0
IAT[ 3] : 0 0
IAT[ 4] : 0 0
IAT[ 5] : 0 0
IAT[ 6] : 0 0
IAT[ 7] : 0 0
Symbols : 0 0
To Next Page
Loading...
