Extreme Networks EAS 100-24t Switch CLI User Manual

LLDP Commands
Extreme Networks EAS 100-24t Switch CLI Manual
53
all - Specifies that all the basic TLVS options will be used.
port_description - This TLV optional data type indicates that LLDP agent should
transmit 'Port Description TLV on the port.
system_name - This TLV optional data type indicates that the LLDP agent should
transmit 'System Name TLV'. The default state is disabled.
system_description - This TLV optional data type indicates that the LLDP agent should
transmit 'System Description TLV'. The default state is disabled.
system_capabilities - This TLV optional data type indicates that the LLDP agent should
transmit 'System Capabilities TLV'. The system capability will indicate whether the
device provides repeater, bridge, or router functions, and whether the provided
functions are currently enabled. The default state is disabled.
enable - Specifies that the port description option will be enabled.
disable - Specifies that the port description option will be disabled.
dot1_tlv_pvid - This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN ID TLV transmission is allowed on a given LLDP
transmission capable port. The default state is disable.
enable - Specifies that the Dot1 TLV PVID option will be enabled.
disable - Specifies that the Dot1 TLV PVID option will be disabled.
dot1_tlv_protocol_vid - This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN ID TLV transmission is allowed on a given LLDP
transmission capable port. The default state is disabled.
vlan - Specifies the VLAN used for the Dot1 TLV protocol VID configuration.
all - Specifies the all VLANs will be used for the Dot1 TLV protocol VID configuration.
<vlan_name 32> - Specifies the VLAN name used for the Dot1 TLV protocol VID
configuration.
vlanid <vlanid_list> - Specifies the VLAN ID used for the Dot1 TLV protocol VID
configuration.
enable - Specifies that the Dot1 TLV Protocol VID option will be enabled.
disable - Specifies that the Dot1 TLV Protocol VID option will be disabled.
dot1_tlv_vlan_name - This TLV optional data type indicates whether the corresponding
Local System’s VLAN name instance will be transmitted on the port. If a port is
associated with multiple VLANs those enabled VLAN IDs will be advertised. The default
state is disable.
vlan - Specifies the VLAN used for the Dot1 TLV protocol name configuration.
all - Specifies the all VLANs will be used for the Dot1 TLV protocol name configuration.
<vlan_name 32> - Specifies the VLAN name used for the Dot1 TLV protocol name
configuration.
vlanid <vlanid_list> - Specifies the VLAN ID used for the Dot1 TLV protocol name
configuration.
enable - Specifies that the Dot1 TLV Protocol name option will be enabled.
disable - Specifies that the Dot1 TLV Protocol name option will be disabled.
dot1_tlv_protocol_identity - This TLV optional data type indicates whether the
corresponding Local System's Protocol Identity instance will be transmitted on the port.
The Protocol Identity TLV provides a way for stations to advertise protocols that are
important to the operation of the network. Such as Spanning Tree Protocol, the Link
Aggregation Control Protocol, and numerous vendor proprietary variations are
responsible for maintaining the topology and connectivity of the network. If EAPOL,
GVRP, STP (including MSTP), and LACP protocol identity is enabled on this port and it
is enabled to be advertised, then this protocol identity will be advertised. The default
state is disable.
config lldp ports

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English