138
19-2-2. Using the RECALL Button
To Recall Events (fastest method):
(1) Press EVENT in the MEMORY block.
(2) Press the number button where the needed data
is stored.
(3) Press RECALL.
The selected event will then be applied to the panel.
Ex) To Recall EVENT 03
Successively press EVENT > 3 > RECALL.
(Note that In this case, 3 of the current page (PAGE 0)
is recalled.)
To Recall Events (detailed):
(1) Press EVENT in the MEMORY block.
The [EVENT MEMORY] menu will appear and
the keypad changes to EVENT mode.
(2) Press PAGE above the keypad.
(3) Select a page by pressing a number button.
(4) Press the number button where the needed
data is stored. The saved data details will be
displayed on the menu screen.
(5) At this time users can select to recall all saved
data or specific data within the event by selecting
on the menu screen (for example, loading data
excluding M/E2 settings)
(6) Press RECALL to load the settings.
Ex) To Load EVENT 23
Successively press EVENT > PAGE > 2 > 3 > (Select data in the menu.) > RECALL
Note that the current event page is displayed under SELECT NO in the EVENT menu.
CONTROL
MEMORY
M/E1
M/E2
MENU LOCK KEY PRI PAGE
DIRECT PATT MACRO EVENT SEQUENCE
INC
DEC
7 8 9
4 5 6
1 2 3
0
RECALL STORE
ENTER
CLEAR
+ / -
CK WIPE SUB EFF
FLX4FLX3FLX2FLX1
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4
CONTROL
MEMORY
M/E1
M/E2
MENU LOCK KEY PRI PAGE
DIRECT PATT MACRO EVENT SEQUENCE
INC
DEC
7 8 9
4 5 6
1 2 3
0
RECALL STORE
ENTER
CLEAR
+ / -
CK WIPE SUB EFF
FLX4FLX3FLX2FLX1
KEY1 KEY2 KEY3 KEY4
KEY1 KEY2 KEY3 KEY4