196
25-7-2. VTR Control
Open the [SETUP > VTR > VTR1 (VTR2)] menu.
Sets the CUE UP time in PAGE 2. To set the time, turn F1 to set the
time, then tap the CUE UP button.
Timecode /
playback status
Displays the current VTR state on the left side and playback state on
the right side.
REW, JOG-REV (one step forward), PLAY (PAUSE while playing),
JOG-FWD (one step backward), FF and STOP from the left.
Toggles the READY mode On/Off.
Lit when ready and unlit when not ready.
Starts recording when pressed while recording is ready.
25-7-3. Assigning VTR Functions to USER Buttons
The following VTR functions can be assigned to user buttons.
Shortcut to the VTR menu
VTR channel On/Off
VTR 1 SELECT
VTR 2 SELECT
VTR operations
REW, PLAY/PAUSE, FWD, STOP, REC, GOTO TOP
See Sec. 24-3. "USER Button" for details on function assignments.
See Appendix 1. User Button Functions for details on available functions.
To Next Page
Loading...
