140
19-3. Overwrite Protection
(1) Press EVENT in the MEMORY block.
(2) Turn DIRECT to OFF so as not to load events.
(3) Press the number (memory) button to be set. The button goes from lit to flashing the [EVENT
RECALL] appears.
When EVENT is pressed, number buttons light up if they have setting data.
(4) Turn F3 to set OVERWRITE to DISABLE.
19-4. Deleting Event Data
To Delete Data for an Event
(1) Press EVENT in the MEMORY block.
(2) Turn DIRECT to OFF so as not to load events.
(3) Press the number (memory) button. The button goes from lit to flashing the [EVENT
RECALL] appears.
(4) Go to [EVENT MEMORY] menu PAGE 2.
(5) Turn F1 to turn DELETE to ON, then press F1 to delete the event data.
To Delete Data for an Event Page
(1) Press EVENT in the MEMORY block to display the [EVENT MEMORY] menu.
(2) Go to [EVENT MEMORY] menu PAGE 2.
(3) Turn F2 to select a page number.
(4) Press F2 to delete the event page data.
To Delete All Event Data
Press F3 to turn ALL CLEAR to ON in the [EVENT MEMORY] menu. Press F3 to delete all
event data.
To Next Page
Loading...
