FOR-A HVS-490 User Manual

204
27. Status Information
The STATUS menu indicates the current status of the cooling fan and power and the versions of
hardware and software.
27-1. Checking Verifying Versions
To verify software/firmware versions, open the [STATUS > VERSION] menu. Before upgrading the
switcher, be sure to check the relevant versions in this menu.
Device
Item
Description
HVS-492OU
HVS-492WOU
HVS-492ROU
OU SOFT
OU
GUI
Software version
OU HARD
FPGA1-2
FPGA firmware version
HVS-490
S/N
Serial Number
MU SOFT
MAIN
WEB
BOOT
LOADER
APP
OS
MV FONT
Software version
MU HARD
CPU
CONFIG
GENLOCK
INPUT
OUTPUT
M/E1-2
EFF1-2
MV1-2
FPGA firmware version
27-2. Checking Alarm Status
Open the [STATUS > ALARM] menu.
MU/OU
Item
Display
Description
OU
POWER SUPPLY1
POWER SUPPLY2
SUPPLIED
Indicates that power works properly.
ERROR
Indicates that power has failed. Power off the
switcher and consult your FOR-A reseller.
NOT INSTALLED
Indicates that the power unit is not installed.
MU
POWER SUPPLY1
POWER SUPPLY2
SUPPLIED
Indicates that power works properly.
ERROR
Indicates that power has failed. Power off the
switcher and consult your FOR-A reseller.
NOT INSTALLED
Indicates that the power unit is not installed.
FAN1-6
NORMAL
Indicates fans are working properly.
ERROR
Indicates a fan has failed.
Power off the switcher and consult your FOR-A
reseller.
GENLOCK
EXTERNAL
LOCKED
Genlock signal is present and locks video signals.
INTERNAL
LOCKED
The switcher operates in free-running. A genlock
signal is not present or incorrect signal is input.

FOR-A HVS-490 Specifications

General

Brand	FOR-A
Model	HVS-490
Category	Switch
Language	English