EasyManua.ls Logo

FOR-A HVS-490 - Page 207

FOR-A HVS-490
241 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
207
Multi viewer
Output channels: 3 (SD formats: 2)
Split display: 2/4/5/7/9/10/11/14/15/16 (Max. 49 via HDMI 2.0 Level B)
Display: Title, tally, audio level meter
Process amplifier
Equipped with all inputs
Still/clip store
4 channels
2.5D DVE
16 channels (8 channels in 1080/59.94p, 50p with bus restrictions)
* 16 channels with HVS-49DVE option
Transitions
Available controller: Fader controller, AUTO button, CUT button
Type: MIX or WIPE (DVE included)
Genlock input
BB: 0.429 Vp-p (NTSC)/0.45 Vp-p (PAL) or Tri-level sync: ±0.3 Vp-p, 75
Ω, BNC x1, loop-through (to be terminated with 75Ω terminator, if unused)
Genlock output
BB: 0.429 Vp-p (NTSC)/0.45 Vp-p (PAL) or Tri-sync: 0.6 Vp-p, 75Ω, BNC
x 1
System phase
adjustment
Horizontal: -1/2H to +1/2H
Video I/O delay
Minimum delay (Approx. 1.4H)
* 720/59.94p (Approx. 1.7H), 720/50p (Approx. 1.8H), SD (Approx. 2.6H)
0 to 1 frames + Minimum delay (when FS or input re-sizing engine used)
1 to 2 frames + Minimum delay (when FS or input re-sizing engine plus
DVE used)
2 to 3 frames + Minimum delay (when FS or input re-sizing engine plus
output re-sizing engine plus DVE used)
External memory
SD-CARD slot
Audio Input (optional)
HVS-49AES
(AES/EBU)
Balanced, 0.2-7 Vp-p, 110Ω, 25-pin D-Sub (female) x 1, input/output,
4 stereo channel pairs, 32/44.1/48 kHz, 16-bit to 24-bit
or
Unbalanced, 1.0 Vp-p, 75Ω, BNC x 4,
4 stereo channel pairs, 32/44.1/48 kHz, 16-bit to 24-bit
Audio Output (optional)
HVS-49AES
(AES/EBU)
Balanced, 3.3 Vp-p, 110Ω, 25-pin D-Sub (female) x 1, input/output,
4 stereo channel pairs, 48 kHz, 24-bit
Unbalanced, 1.0 Vp-p, 75Ω, BNC x 4,
4 stereo channel pairs, 48 kHz, 24-bit
Audio Delay
0 - 85 ms (adjustable in 1 ms steps)
Audio Processing
Functions
Sampling rate converter (SRC), Gain control
Interface
LAN HVS (OU)
LAN EXT
10/100BASE-TX, RJ-45 x 2
For OU and other external control unit connection
GPI IN/ALARM
25-pin D-sub (female) x 1 (inch screw) 19 inputs
GPI/TALLY OUT
25-pin D-sub (female) x 1 (inch screw) 22 outputs
RS-422
9-pin D-sub (female) x 2 (inch screw) *For router connection
HVS LAN
HVS-492OU/492WOU/492ROU: 10/100BASE-TX, RJ-45 x 1
GPI I/O
HVS-492OU/492WOU/492ROU: 15-pin D-sub (female) x 1 (inch screw),
6 inputs/6 outputs
Temperature/humidity
0°C to 40°C/10% to 90% (no condensation)
Power
AC 100 V to 240 V±10%, 50/60 Hz
Consumption
HVS-490 (standard): 508 W (at 100-120 V), 452 W (at 220-240 V)
HVS-490 (full option): 780 W (at 100-120 V), 723 W (at 220-240 V)
HVS-492OU: 27 W (at 100-120 V), 28 W (at 220-240 V)
HVS-492WOU: 30 W (at 100-120 V), 28 W (at 220-240 V)
HVS-492ROU: 20 W (at 100-120 V), 18 W (at 220-240 V)

Table of Contents

Other manuals for FOR-A HVS-490

Related product manuals