227
Copying, moving and swapping macros
Select SOURCE No and TARGET No in the FILE CONTROL block. Click COPY (a), MOVE (b) or
SWAP(c) to copy, overwrite or swap macros.
Editing macros
(1) Select a macro number from the macro list on the left side.
(2) Click EDIT MENU in the top of the screen to display the EDIT menu.
(3) The action list of the selected macro is displayed in the left side of the screen. Select an action.
(4) Set the duration time to the next action under DUR.
(5) Checking a BREAK box stops the macro play at the corresponding action.
(6) Clicking DELETE in the CONTROL area deletes the selected action from the macro. Play and
Stop buttons allow you to verify the edited macro operation.
(7) Macro actions can be stored in the ITEM LIST in the right side of the screen.
(8) Clicking ITEM COPY copies the selected action to the ITEM LIST.
(9) To add or replace actions to the macro, use ADD ACTION, INSERT ACTION or OVER WRITE
ACTION (add backward, add backward or replace.
(10) Click SAVE in the CONTROL area to save the edited macro.
To Next Page
Loading...
Need help?
General
