70
Applying a Color to Unassigned Bus Buttons
A desired light color can be set for a button to which no signal is assigned.
(1) Open the [PANEL > BUS ASSIGN > ALL LEVEL] menu.
(2) Turn F2 to select PALETTE or BLANK.
If PALETTE is selected, select a specific color for each bus button under COLOR
PALETTE in the [PANEL > BUS ASSIGN > LEVEL1-4] menu.
If BLANK is selected, a color set for BLANK is applied to all unassigned bus buttons. (See
9-4-1. “Creating and Saving Colors.)
PANEL > BUS ASSIGN > ALL LEVEL
To Next Page
Loading...
