EasyManuals Logo

Fuji Xerox DocuCentre SC2020 Service Manual

Fuji Xerox DocuCentre SC2020
832 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #121 background imageLoading...
Page #121 background image
05/2014
2-99
DC SC2020
Troubleshooting
CHAIN 93
Version 1.1
Damage, contamination by foreign substances of the joining terminal between CRUM PWB of
Toner Cartridge (K) and CRUM of Toner CRUM Connector Assembly (K).
Uncleanness, dislocation of CRUM PWB of Toner Cartridge (K).
The Toner Cartridge (K) for improper installation
If no problem is found, replace the following parts in sequence:
Toner Cartridge (K) (PL 5.1)
Toner CRUM Connector Assembly (K) (Dispenser Drive (CK)) (PL 5.3)
DRIVE PWB (PL 18.2)
093-926 Toner K CRUM Data Mismatch
BSD-ON:CH9.6
Detected invalid Authentication Area Data of CRUM of Toner Cartridge (K).
Cause/Action
Remove and reinstall the Toner Cartridge (K) and check for improper installation.
Replace with genuine Toner Cartridge (K) (PL 5.1) if there is no problem after checking.
093-928 Toner K CRUM Data Broken
BSD-ON:CH9.6
Detected inequality in write data and read data of CRUM of Toner Cartridge (K).
Cause/Action
Remove and reinstall the Toner Cartridge (K) and check for improper installation.
Replace Toner Cartridge (K) if there is no problem after checking. (PL 8.1)
093-930 Toner Y Life Over
BSD-ON:CH9.5
Toner Cartridge (Y) has reached its life.
Cause/Action
Replace Toner Cartridge (Y). (PL 5.1)
093-931 Toner M Life Over
BSD-ON:CH9.5
Toner Cartridge (M) has reached its life.
Cause/Action
Replace Toner Cartridge (M). (PL 5.1)
093-932 Toner C Life Over
BSD-ON:CH9.6
Toner Cartridge (C) has reached its life.
Cause/Action
Replace Toner Cartridge (C). (PL 5.1)
093-933 Toner K Life Over
BSD-ON:CH9.6
Toner Cartridge (K) has reached its life.
Cause/Action
Replace the Toner Cartridge (K). (PL 5.1)
093-944 Deve HSG Y Life End
BSD-ON:-
Indicates Deve HSG Y reached its usage limit. (Restrict Print operation)
Cause/Action
Replace the Deve Unit (Y). (PL 5.1)
After replacing, enter CE Mode, go to Printer Diag > Parameter > Life > Deve HSG PV Y and initialize the
Life Counter.
093-945 Deve HSG M Life End
BSD-ON:-
Indicates Deve HSG M reached its usage limit. (Restrict Print operation)

Table of Contents

Other manuals for Fuji Xerox DocuCentre SC2020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre SC2020 and is the answer not in the manual?

Fuji Xerox DocuCentre SC2020 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre SC2020
CategoryAll in One Printer
LanguageEnglish

Related product manuals