Fuji Xerox DocuCentre SC2020 - File Close Error; Memory Pool Get Error; Message Send Error; Memory Pool Release Error

05/2014
2-120
DC SC2020
CHAIN 133
Version 1.1
Troubleshooting
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-269 File Close Error
BSD-ON:-
File close error.
Cause/Action
Turn the power off and on to check that the error recurs. If the problem cannot be solved, replace the fol-
lowing parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-271 Memory Pool Get Error
BSD-ON:-
Memory pool get error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-272 Message Send Error
BSD-ON:-
Message send error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-273 Memory Pool Release Error
BSD-ON:-
Memory pool release error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-274 Message Receive Error
BSD-ON:-
Message receive error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-275 OS Call Error
BSD-ON:-
OS Call error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the FAX PWB (PL 18.5)
133-276 File Open Error
BSD-ON:-
File open error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-277 File Close Error
BSD-ON:-
File close error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
133-278 File Erase Error
BSD-ON:-
File erase error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)