05/2014
2-122
DC SC2020
CHAIN 133
Version 1.1
Troubleshooting
133-290 Print Decode Error
BSD-ON:-
At JBIG data print decode, decode error occurred three successive times.
Cause/Action
Turn the power off and on to check that the error recurs. -Checking the telephone line connection. Recon-
nect the telephone line connector. -Checking the sending side fax. Receive the fax data from known good
fax machine. -Update to the latest F/W. If the error persists after the action above is taken, ensure that
the error replicates after the printer is powered off and then on, and then replace the following parts in
sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
To Next Page
Loading...
