05/2014
6-19
DC SC2020
General
6.1.17 Auto 2 Sided Printing
Version 1.1
6.1.17 Auto 2 Sided Printing
The paper sizes and weights that can be used for 2 sided print are as follows.
1. Paper Size
• Main scanning direction: 128.0mm - 297.0mm
• Sub-scanning direction: 139.7mm - 431.8mm
2. Paper Weight
• 60 gsm~110gsm
6.1.18 Output Function
6.1.18.1 Center Tray
Supported Size: All paper sizes handled by the machine
Capacity: The average values of the no. of sheets that can be accommodated are as follows (using fresh
paper).
• The above is Simplex print
• The ability to accommodate A4 SEF and Letter SEF is not defined.
• Full Stack detection: None
• Finishing Capability
– Can easily sort without folding or messing up the order
– Paper with width of 177 mm or smaller may have problems with folding and collating.
• Output orientation: Face down
6.1.18.2 OCT
OCT (Offset Catch Tray) output function not available.
6.1.18.3 Side Tray
Side Tray output function not available.
Table 1
Configuration Output Tray Paper Type Output Capacity
None Output Tray body P Paper - A4 LEF 250 sheets
P Paper - A3 SEF 200 sheets
To Next Page
Loading...
