Fuji Xerox DocuCentre SC2020 Service Manual

05/2014
2-53
DC SC2020
Troubleshooting
CHAIN 33
Version 1.1
• ESS PWB (PL 18.2)
033-760 Control Channel OFF Time Out
BSD-ON:-
The Control Channel OFF Time Out occurred.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-761 Primary Channel OFF Time Out
BSD-ON:-
The Primary Channel OFF Time Out occurred.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-762 DM Prevention Function Receive Refuse
BSD-ON:-
DM prevention function rejects to receive data.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Setting
the receiving side fax. Set the Speed Dial. -Update to the latest F/W. If the error persists after the action
above is taken, ensure that the error replicates after the printer is powered off and then on, and then
replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-763 Manual Transmission Read Manuscript Not Do
BSD-ON:-
In manual send, cannot make document read on time.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-764 Draw Data Create Not Do
BSD-ON:-
When sending, cannot make image data creation on time.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-765 File Pointer Error
BSD-ON:-
In encode/decode, Read/Write file pointer error.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
033-766 Target File Opening
BSD-ON:-
In decode, encoding target file open.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English