05/2014
2-110
DC SC2020
CHAIN 117
Version 1.1
Troubleshooting
BSD-ON:-
NVM sum check value error.
Cause/Action
Turn the power off and on to check that the error recurs. Then, replace the ESS PWB. (PL 18.2)If the
problem cannot be solved, replace the printer.
117-365 Low Voltage
BSD-ON:-
RTC detected Low Voltage. RTC clock setting and content of SRAM are invalid. Initialize them.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W.If the problem
cannot be solved, replace the ESS PWB. (PL 18.2)
117-367 FXIF error
BSD-ON:-
An error occurred on FXIF (such as the Video Underrun error).
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• ESS PWB (PL 18.2)
•IIT (PL 1.1)
To Next Page
Loading...
Need help?
General
