Fuji Xerox DocuCentre SC2020 Service Manual

05/2014
2-20
DC SC2020
CHAIN 5
Version 1.1
Troubleshooting
Cause/Action
1. Check the size of the document that was fed by the User.
2. If the error is not cleared, check the following:
• Malfunction of DADF Pre Regi. Sensor (DADF IIT Input[005-206]). (PL 56.14)
• Malfunction of Document Tray Size Sensor 1/2 (DADF IIT Input[005-221/222]). (PL 56.11)
3. If no problem is found, replace the DADF PWB. (PL 56.2)

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English