EasyManua.ls Logo

Fuji Xerox DocuCentre SC2020

Fuji Xerox DocuCentre SC2020
832 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
05/2014
2-117
DC SC2020
Troubleshooting
CHAIN 133
Version 1.1
133-231 T_FAXCOM Data Receive I/F Error
BSD-ON:-
T_FAXCOM<->Data processing I/F error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-234 JBIG Parameter Error
BSD-ON:-
JBIG parameter error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-235 MHR Parameter Error
BSD-ON:-
MHR parameter error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-236 MHR Encode Error
BSD-ON:-
MHR encode error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-237 MHR Input Buffer Error
BSD-ON:-
Data error of MHR input buffer.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-238 MHR Output Buffer Error
BSD-ON:-
Data error of MHR output buffer.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-239 FAX ECM Buffer Address Error
BSD-ON:-
At FAX send/receive, address to get from and write in ECM buffer is wrong.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-240 Resolution Change Error
BSD-ON:-
Resolution error in FAX send resolution conversion.

Table of Contents

Other manuals for Fuji Xerox DocuCentre SC2020

Related product manuals