Fuji Xerox DocuCentre SC2020

05/2014
2-118
DC SC2020
CHAIN 133
Version 1.1
Troubleshooting
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-241 Memory Pool Get Error
BSD-ON:-
Memory pool get error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-242 Memory Pool Release Error
BSD-ON:-
Memory pool release error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-243 Message Send Error
BSD-ON:-
Message send error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-244 Message Receive Error
BSD-ON:-
Message receive error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-246 Memory Pool Get Error
BSD-ON:-
Memory pool get error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-247 Message Send Error
BSD-ON:-
Message send error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)
133-248 Memory Pool Release Error
BSD-ON:-
Memory pool release error. (OS error)
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)