05/2014
6-14
DC SC2020
6.1.13 Print Speed
Version 1.1
General
Output settings can be selected from CopyDefault > Output Color. Color settings are set in Output of
the UI panel.
6.1.13 Print Speed
Continuous speed (PPM) of the print engine is defined as follows:
During output to the Main Body Output Tray, taking the time from when the tail edge of the 1st sheet is
output from the IOT exit area until the tail edge of the 11th sheet is output from the MC exit area to be t
seconds, the no. of sheets that is printed in 1 minute is given as [(60/t)x10 for 1 Sided and (60/t)x20 for 2
Sided].
Consecutive printing speed shown in the table below. The numerical value for Duplex is IPM (Images Per
Minute).
Limitations
• This does not include the time for settings/cleaning/sagging/procon.
20 IOT (Main Body Feed Tray (Tray1)/Main Body Output Tray Paper)
Unit: 1 Sided: ppm, 2 Sided: ipm
* 1: Normally, no double-sided plain paper back, recycled paper back
3 DADF Output Tray Black (BW Mode) 10.0 sec or less 13.3 sec or less
4 Output Tray Color 11.8 sec or less 13.0 sec or less
Table 2
No.
Document Set
Platen/DADF Output Tray
Color Setting
Output Setting
BW
(PS:126mm/s)
FC
(PS:126mm/s)
Table 1
Paper Type
Settings Output
Color
SS Direction
216.0mm or
lighter and
FS direction
257.1mm or
higher (A4L/
8.5x11L)
SS
Direction216.
1-297.0mm
and FS
direction257.
1 mm or
higher
SS Direction
297.1-
364.0mm and
FS
direction257.
1 mm or
higher
SS Direction
364.1-
432.0mm and
FS
direction257.
1mm or
higher (A3S/
11x17S)
SS Direction
432.0mm or
lighter and FS
direction257.0
mm or lighter
(B5S/L, A4S,
B4S, 8.5x11S/
13S/14S)
1
Sided
2
Sided
1
Sided
2
Sided
1
Sided
2
Sided
1
Sided
2
Sided
1
Sided
2
Sided
Plain
*1Recycled
*1Pre-
Punched
PrePrinted
Colored
paper Letter-
head
FC 20 17 12 11 12 10 12 8.5 12 8.5
BW 20 17 12 11 12 10 12 8.5 12 8.5
To Next Page
Loading...
Need help?
General
